Tech-lock Clip Instructions

To lock, simply place the metal knob in the clip opening and pull down. The clip will lock the knob in place preventing any false releases.

Step1 - Rotate the case 90 degrees	Step2 - As you rotate it, place your thumb on the trigger and slide it forward (right handed)	Step3 - Pull case upward and release it

One-handed Release:
Easy one-handed release with many safety features to prevent releasing your device inadvertently.
To release the device, shift the trigger laterally and then pull up on your cell phone, PDA or any other device attached to the TechLock

Removable Knob System Instructions

No Clip:

Step1 - Start with no device in the case Step2 - Place leather tab on opening	Step3 - Before pressing tab in place, align tab with leather pattern	Step4 - Push leather tab in place. For best results, support the case from the inside while pressing the tab in place

With Clip:

Step1 - Start with no device and no knob in the case	Step2 - Place belt-clip knob into place	Step3 - Align it with the square opening
Step4 - Hold knob with one hand and turn case over Step5 - Place lock disk in screw hole	Step6 - Twist lock gently in place (clockwise motion to initiate screw) Step7 - Use the locking tool to tighten the lock firmly in place	Step8 - To avoid scratching the device, make sure that the lock is tight and below the surface of the inner lining

eNOVO Care Instructions

Placing and Removing the device

1. Place device in the case without compressing the case	2. Once the device is in the case, the case is very strong	3. Use the flat part of a pen or tip of your finger to push the device up.
4. Avoid pushing on the case it self.	5. This may crack the shell of the case.	6. Once the device is accessible, pull on the device frame, not the screen.

Exotic Skin Care

Please follow these simple steps to take care of your exotic skin case:

1. To maintain the shine of the case, please use clear shoe wax to occasionally polish
(In the direction of the scales).
NOTE: Avoid polishing against the scales as these may break off.
2. To activate the clear wax, ideally polish with an electric shoe polisher.